Shock Absorber (9) Piston Rod (19) Steering System (10) Ball Joint (8) Rubber Parts (2) Plastic Parts (4) Hardware (3) Stamping Parts (1)A company has released a seal with double-acting crown backing for better and safer sealing.
The seal is characterised by up to five dealing edges.
Multiple edges allow the user to achieve better sealing and smoother operation than more conventional seals.
The design also allows the seal to hold more lubrication in the valleys of the profile, thereby reducing friction. This, plus a backing crown means improved sealing with less friction, and the removal of pump effect.
The unit is available in five configurations, including compact and energised models, and are for use in critical hydraulic rod and piston sealing applications.
Based on a U-shaped seal, the configurations allow for greater versatility and a wider range of uses.
Single action seals, with double-acting crown backing, are able to withstand extremes in operating temperatures.
The seals can be used with hydraulic oil (HL, HLP) and mineral grease at temperatures between -50°C to 120°C.
The seals do not exhibit stick slip, even under low pressure.
The news come from http://www.bossgoo.com
Bookmark this page