Si3N4 silicon ceramic shaft axle bearing nut razor
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||15 Days|
|Place of Origin:||Guangdong,China|
|Supply Ability:||1,000,000 pcs/Month|
Model No.: SNC-035
Si3N4 silicon ceramic Shaft Axle bearing nut razor
Reputation depends on quality, quality comes from Hard!
Silicon Nitride Ceramic:
Si3N4 ceramic is an important structural material. It is a kind of super-hard material. It is lubricious and wear-resistant. It does not react with other inorganic acids except hydrofluoric acid. It has strong corrosion resistance and resistance at high temperature. It is also resistant to thermal shock. It is heated to above 1,000 °C in air, and is rapidly cooled and heated rapidly without cracking. It is precisely because of the excellent properties of Si3N4 ceramics that it is often used to make bearings. Mechanical components such as gas turbine blades, mechanical seal rings, permanent molds, etc. If the silicon nitride ceramics with high temperature resistance and heat transfer resistance are not used to manufacture the heating surface of engine parts, not only can the diesel engine quality be improved, fuel can be saved, but thermal efficiency can be improved. China, the United States, Japan and other countries have developed such diesel engines.
High hardness, high strength, wear resistance, corrosion resistance, high temperature(1200°), good thermal diffusivity, good thermal shock resistance(avoid the temperature changing rapidly), good insulativity, low density. The comprehensive properties are best in most of structure ceramic.
Data Sheet↓Color: Black Grey
Vickers Hardness (Hv50): ＞1550 HV0.5
Modulus of Elasticity: 290Gpa
Flexural Strength: ＞600Mpa
Compressive Strength: 2500Mpa
Modulus of Elasticity(25°C): 65Gpa
Fracture toughness:＞6.0 Mpam1/2
Maximum Use Temperature: 1200°C
Thermal Conductivity:15-20 W(m.K)
Thermal Expansion Coefficient: ＞3.1 10-6/°C
Thermal Shock Resistance: 500 △T°C
Special Heat Capacity: 700 KJ/kg.K
Dielectric Strength: 1 KV/mm
Dielectric Constant: er
Volume Resistivity(20°C): 1.0*10(12)Ω.cm
Machinery, electronic, semiconductor, chemical, petroleum, smelt.
Welding shaft, electronic substrate, plunger, nozzle, slide guide, diesel parts, metal molding, shaft wheels etc.
1.12 years of professional production industrial ceramics factory
2.High quality products with low price
3.High precision parts with lowest tolerance
4.Short time for production
5.Has a group of experienced, professional and efficient R&D team
6.Has a good reputation in China and abroad.
7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
SHENZHEN HARD PRECISION CERAMIC CO.,LTD
Shenzhen Hard precision ceramics Co., LTD. has been committed to design, development and manufacture of industrial ceramic products since 2007. Compared with metal, advanced ceramic has the following excellent performance: high hardness, high strength, high temperature (fire), and can wear resistance, corrosion resistance, acid and alkali resistance, oxidation resistance, insulation, non-magnetic and good chemical stability . So it is often used in the environment where the metal material cannot endure. With its promising application , advanced ceramics are widely used in aerospace, aviation, military industry, nuclear power, machinery, textile, chemical, electronics, food, medical and other industries. Our advanced ceramic products made by zirconia (ZrO2), alumina (Al2O3), silicon nitride (Si3N4), etc. Our products can divide into two parts: one part is ceramic ball, rods, tubes, ceramic materials such as plate, block, strip and so on, and the other part is the precision ceramic parts which are for industrial use and civilian products. Our company has advanced one-stop equipment and technology of ceramic forming, sintering and processing. Hope we can establish excellent cooperation with customers from at home and abroad for a wide range .
- Company Name: SHENZHEN HARD PRECISION CERAMIC CO.,LTD
- Representative: ZHOU SHENGBIN
- Product/Service: Alumina Ceramics , Zirconia Ceramics , Silicon Nitride Ceramics , Machinable Glass Ceramics , Laser Cutting Ceramics , Other Materials
- Capital (Million US $): US$500,000
- Year Established: 2007
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: 1st F, Building 8, Nangang Second Industrial Zone, Nanshan Dist, Shenzhen,China 518055
- Contact Person: Mr. Watson Lin
- Tel: 86-0755-86238834
Premium Related Products